Polycom V500, Administrator'S Manual, Page: 62 / 146

Administrator’s Guide for the V500 System
4 - 12
To use the same password for both local and remote access:
1.
Go to System > Admin Settings > General Settings > Security .
2.
Select Use Room Password for Remote Access .
To reset a forgotten password:
1.
Get the system’s serial number from the system or from the System
Information screen.
2.
Go to System >Diagnostics > Reset System.
3.
Enter the system’s serial number and select Delete System Settings.
4.
Select Reset System.
After the system resets, it leads you through the setup wizard. You can enter a
new password when you set up the system.
Screens that Require the Room Password for Access
The following illustration shows which screens require the room password.
Admin Settings Diagnostics System Information User Settings
System Settings
Home Screen Settings
Security
Location
General Settings Network LAN Properties Audio Camera Monitor Global Services
H.323 Settings
SIP Settings
Quality of Service
Firewall
IP
ISDN*
Directory Servers
SNMP
Management Servers
Account Validation
My Information
Call Preference
Options
Recent Calls
Dialing Rules
Utilities
Password Protected
General Access
* May not be present for all system types