manualshive.com logo in svg

Polycom V500, Administrator'S Manual, Page: 15 / 146

Share
Download
Polycom V500 Administrator'S Manual Download Page 15

 Setting Up Your System Hardware

2 - 3

Connecting the System to the Network

All V500 systems can be connected to a LAN to make IP calls.
This section tells you how to physically connect the system to the LAN or to 

ISDN (if you purchased the V500 IP with ISDN system). 
The back panel view, shown on page 

2-1

, shows the location of the LAN and 

ISDN BRI connectors.

Connecting to the LAN

The V500 system comes standard with a LAN cable.
You must connect the system to a LAN to:

•

Make IP or SIP calls 

•

Use the Global Directory Server

•

Use the V500 web interface or Content IP

•

Update system software using the Polycom Softupdate program

The back panel view on page 

2-1 

shows the location of the LAN connector. The 

setup sheet for your system also provides this information.

Connecting to the ISDN BRI Network

The V500 IP with ISDN system includes an ISDN BRI network interface, which 

allows you to make ISDN calls.
If your site does not use an internal telephone system (PBX), you may need an 

NT-1 device to connect to the ISDN BRI network. A PBX or NT-1 device 

provides the S/T interface that the system’s BRI network interface requires.

To connect the system to the ISDN BRI network:

1.

Make sure the system is powered off.

2.

Connect the BRI cable from the BRI connector on the back of the system to 

the ISDN or to your NT-1 device, as appropriate.

3.

If you are using an NT-1 device, connect it to the ISDN.

Summary of Contents for V500



















































































































































Reviews:

No comments