manualshive.com logo in svg

Polycom V500, Administrator'S Manual, Page: 114 / 146

Share
Download
Polycom V500 Administrator'S Manual Download Page 114

Administrator’s Guide for the V500 System

7 - 14

Picture freezes frequently 
during an ISDN call.

Too many network line 
transmission errors. Check 
the error count on the 

Diagnostics > Call 
Statistics

 screen to verify 

this.

Try the call again.

Network interface cable or 
cables may be bad.

Replace the cable or cables.

Picture is slow or jerky.

The system is receiving 
video that includes a large 
amount of motion.

A background with less motion provides a better, 
smoother video picture.

Too many network line 
transmission errors. Check 
the error count on the 

Diagnostics > Call 
Statistics

 screen to verify 

this.

Try the call again, possibly at a lower network speed.

Only one 64 Kbps channel 
is connecting in your call.

Check the ISDN number of the far site. Ask the far 
site to call your site.

No picture in the PIP 
window.

The privacy shutter is 
closed.

Open the privacy shutter.

Symptom

Problem

Corrective action

Summary of Contents for V500



















































































































































Reviews:

No comments