manualshive.com logo in svg

Polycom V500, Administrator'S Manual, Page: 107 / 146

Share
Download
Polycom V500 Administrator'S Manual Download Page 107

 Diagnostics and General Troubleshooting

7 - 7

•

System Lights

•

Network Interface Lights

Power and Start-up 

Symptom

Problem

Corrective action

The system does not start 
or respond in any way

The power switch is off.

Turn on the power switches for the system and any 
equipment connected to it.

The power cord is not 
connected.

Make sure the power pack is connected to a power 
outlet, and that its power cords are seated securely.

The power outlet is not 
active, or the system’s 
power supply is not 
operating properly.

If you connect the system’s power cord to a power 
strip, be sure the power strip is connected to a power 
outlet and its power switch is on.
Check the power outlet by unplugging the system 
and plugging in a lamp, radio, or other small 
appliance. If it does not operate, the outlet is not 
active — connect the system to a different outlet. 
If the outlet is active, the problem is in the system’s 
power supply. In this case, contact your Polycom 
reseller for an RMA to return the system or the 
defective part.

The system starts in the 
software update screen

The system software is 
corrupted or not loaded 
properly.

Load the system software from your computer. For 
instructions on how to do this, see 

Keeping your 

Software Current

 on page 

3-33

.

The system restarts over 
and over

The power plug is not fully 
seated.

Make sure the power plug is seated securely.

The socket is corroded.

Unplug and reseat the power plug 5 times.

The power plug is damaged 
or the power supply is bad.

Contact your Polycom reseller for an RMA to return 
the system or the defective part.

Summary of Contents for V500



















































































































































Reviews:

No comments