manualshive.com logo in svg

Poly P010, Administrator'S Manual, Page: 3 / 101

Share
Download
Poly P010 Administrator'S Manual Download Page 3

Configure Sleep Settings.................................................................................................. 26
System Usage Data Collected by Poly............................................................................. 26

Turn Off System Usage Data Collection.................................................................27

Using a Provisioning Service..........................................................................28

Register the System with a Provisioning Service..............................................................28
Download a Template Configuration File.......................................................................... 29

Managing Conferencing Applications............................................................30

Update Third-Party Conferencing Software Manually in the System Web Interface.........30

Configuring Network Settings.........................................................................31

Configuring Wired LAN Settings....................................................................................... 31

Automatically Obtain IPv4 Address Settings.......................................................... 31
Manually Configure IPv4 Address Settings............................................................ 31
Manually Assign a Host Name and Domain Name................................................ 32
Manually Configure DNS Settings..........................................................................32
Configure VLAN Settings....................................................................................... 32
Configure 802.1X Settings..................................................................................... 33
Configure Wired LAN Options................................................................................ 33

Configure Wi-Fi Settings................................................................................................... 34
Configure Network Quality Settings.................................................................................. 34

Securing the System........................................................................................37

Managing System Access.................................................................................................37

Local Accounts....................................................................................................... 37
Configure System Access Settings........................................................................ 40
Configure the System Web Interface Port Lock..................................................... 41
Disable USB Ports..................................................................................................41

PKI Certificates................................................................................................................. 42

Create a Certificate Signing Request..................................................................... 42
Configure Certificate Validation Settings................................................................ 44
Install a Certificate..................................................................................................44
View a Certificate....................................................................................................45
Delete a Certificate.................................................................................................45
Certificate Revocation............................................................................................ 45

Call Encryption.................................................................................................................. 47
H.460 Firewall/NAT Traversal........................................................................................... 47

Configure the System for H.460 Firewall/NAT Traversal........................................48

Web Proxies......................................................................................................................50

Contents

2

Summary of Contents for P010






































































































Reviews:

No comments