manualshive.com logo in svg

Poly P010, Administrator'S Manual, Page: 32 / 101

Share
Download
Poly P010 Administrator'S Manual Download Page 32

Configuring Network Settings

Topics:

▪

Configuring Wired LAN Settings

▪

Configure Wi-Fi Settings

▪

Configure Network Quality Settings

Network settings include the system primary (wired LAN) and secondary (Wi-Fi) network configurations.

Configuring Wired LAN Settings

You can set the wired LAN properties for your system.

Related Links

LED Status Indicators for the System LAN Ports

 on page 96

Automatically Obtain IPv4 Address Settings

Your system by default gets its IP address information automatically. If this behavior is turned off, you can
turn it back on.

You must have a DHCP server deployed in your environment.

Procedure

1.

In the system web interface, go to 

Network

 > 

Primary Network

 > 

IP Addresses

.

2.

For 

IP Address

, select 

Obtain IP address automatically

.

Some of your IP address settings populate automatically and are read-only.

3.

Select 

Save

.

Manually Configure IPv4 Address Settings

You can manually specify the system’s IPv4 address settings.

Procedure

1.

In the system web interface, go to 

Network

 > 

Primary Network

 > 

IP Addresses

.

2.

For 

IP Address

, select 

Enter IP address manually

.

3.

Configure the following settings:

Setting

Description

Your IP Address is

Specifies the system IP address.

Subnet Mask

Specifies the subnet mask assigned to your system.

Default Gateway

Specifies the default gateway assigned to your system.

31

Summary of Contents for P010






































































































Reviews:

No comments