manualshive.com logo in svg

Poly P010, Administrator'S Manual, Page: 10 / 101

Share
Download
Poly P010 Administrator'S Manual Download Page 10

Powering the System On and Off

The system turns on when you plug it into a power source. The system doesn’t have a power button, so
you must unplug the power cable to power it off.

Note:

Don’t power off the system during maintenance activities (for example, while a software update is
in progress).

Related Links

Restart the System

 on page 78

Navigating the System

You can navigate the system using the system web interface.

Access the System Web Interface

Access the system web interface to perform administrative tasks.

The system web interface enables you to do the following actions:

▪ Finish setting up your system.
▪ Remotely configure and manage your system. Unlike the local interface, you can configure every

setting through the system web interface.

Procedure

1.

Open a web browser and enter the system IP address.
When setting up your system, the onscreen instructions display the IP address to use.

2.

Enter the user name (the default is 

admin

).

3.

Enter the password (the default is the last six characters of your system’s serial number).

Related Links

Complete Setup with the System Web Interface

 on page 15

Getting Started

9

Summary of Contents for P010






































































































Reviews:

No comments