Setting
Description
User Name
Specifies the User Security Model (USM) account
name for SNMPv3 message transactions. The
maximum length is 64 characters.
Authentication Algorithm
Specifies the type of SNMPv3 authentication algorithm
used.
▪
SHA
▪
MD5
Authentication Password
Specifies the SNMPv3 authentication password. The
maximum length is 48 characters.
Privacy Algorithm
Specifies the cryptographic privacy algorithm for
SNMPv3 packets.
▪
CFB-AES128
▪
CBC-DES
Privacy Password
Specifies the SNMPv3 privacy (encryption) password.
The maximum length is 48 characters.
Engine ID
Specifies the unique ID of the SNMPv3 engine. You
might need this information to match the configuration
of an SNMP console application. The ID is
automatically generated, but you can create your own
as long as it is between 10 and 32 hexadecimal digits.
You can separate each group of two hex digits by a
colon (:) to form a full 8-bit value. A single hex digit
delimited on each side with a colon is equivalent to the
same hex digit with a leading zero (for example,
:F:
is
equivalent to
:0f:
).
The ID can’t be all zeros or Fs.
Listening Port
Specifies the port SNMP uses to listen for system
messages (the default is port 161).
Transport Protocol
Specifies the transport protocol used.
▪
TCP
▪
UDP
Destination Address1
Destination Address2
Destination Address3
Specifies the IP addresses of SNMP managers where
SNMP traps are sent.
Each address has four settings:
▪
Server address (accepts IPv4 addresses,
hostnames, and FQDNs)
▪
Message type (
Trap
or
Inform
)
▪
Protocol (SNMP
v1
,
v2c
, or
v3
)
▪
Port where SNMP traps are sent (default is
162
)
3.
Select
Save
.
Troubleshooting
90