Poly P010 Administrator'S Manual Download Page 5

Page: 5 / 101

Manually Downgrade Software in the System Web Interface................................ 78
Downgrade Software with a USB Flash Drive........................................................78

Troubleshooting............................................................................................... 84

Logs.................................................................................................................................. 84

SNMP Reporting............................................................................................................... 88

Configure SNMP.................................................................................................... 89
Download MIBs...................................................................................................... 91

Checking System Status................................................................................................... 91

Check Status in Local Interface..............................................................................91

Check Provisioning Results.............................................................................................. 92
Paired IP Audio Device is Disconnected from G7500.......................................................93
Poly TC8........................................................................................................................... 93

Poly TC8 Can’t Pair to the Video System...............................................................93
Poly TC8 Doesn’t Display On the Available Devices List.......................................93
Paired Poly TC8 is Disconnected...........................................................................94
Poly TC8 Paired to Inaccessible Video System..................................................... 95

Contents

Summary of Contents for P010






































































































Search results

Summary of Contents for P010

Reviews:

Poly P010, Administrator'S Manual, Page: 5 / 101

Search results

Summary of Contents for P010

Reviews: