LED Status Indicators for the Studio X50 and Studio X30 Systems
The system provides an LED light bar above the camera to help you understand the system’s behaviors.
Basic Studio X50 and Studio X30 LED Indicators and Status
Indicator
Position
Status
Chasing white
All while alternating
Boot initialization in progress
Blinking blue
Twelve in the middle
Bluetooth in discovery
Solid blue for 3 seconds
All
Bluetooth paired
Blinking green
All
Incoming call
Solid green
Two in the middle
Outgoing call
Solid green or white
Four to eight (when in the middle),
indicating the tracked speaker or
the direction of the camera
Working
The lights are green with supported
applications, with the following
cases:
▪
Tracking people in the group
framing and speaker tracking
mode.
▪
Indicating the direction of the
camera that you customize in
the pan-tilt-zoom (PTZ) mode.
Pulsing red
Twelve in the middle
Call on hold
Pulsing green
Twelve in the middle
Call on hold (by far site)
Solid white for 3 seconds
Twelve in the middle
Saving a preset
Solid red
All
Muted microphone
Pulsing amber
All
Firmware update in progress
Blinking red
All
Error preventing normal operation
Blinking amber
Twelve alternating
In a POST sequence, at least one
test resulted in a warning error. The
system continues to blink amber,
but initializes after the sequence is
complete if no severe errors occur.
Blinking red
Twelve alternating
In a POST sequence, at least one
test resulted in a severe error. The
system continues to blink red and
doesn’t start up.
Setting Up the System
14