7.14
CVT / TRANSMISSION
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
should be no detectable up and down or side to side
movement. Check splines and gear teeth for wear or
damage.
8.
If damage or wear is evident, or if seal is leaking,
replace output housing assembly or replace parts as
required. See “Output Shaft Housing Disassembly /
Assembly” on page 7.22.
9.
Remove all transmission cover screws. Tap lightly
with a soft faced hammer. Pry points (E) can be used
carefully to help release cover and gasket.
10. Remove retaining ring from drive pinion.
11. Remove spacer and gear.
12. Push shaft out of cover housing.
13. Inspect gear teeth and bearing. If components are
replaced, inspect output gear pinion depth and adjust
with shims as required. See “Output Gear Pinion
Depth Adjustment” on page 7.21 for procedure.
If parts are replaced refer to
output gear depth adjustment
in this chapter.
E