7.12
CVT / TRANSMISSION
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
6.
Have an assistant available for final assembly. Install
spring. Place centrifugal hub (F) over the spring and
compress assembly together with both hands,
aligning flats of hub with flats on threaded shaft. With
assembly compressed and threads exposed, have
assistant thread a new nut onto shaft.
7.
Secure clutch in a clamping device and torque nut.
Driven Clutch Installation
1.
Install belt on driven clutch with numbers readable
from centrifugal hub side of clutch.
2.
Compress driven clutch and force belt into the
sheaves as far as possible, and hold belt in position.
3.
Loop the belt over drive clutch and install driven clutch
on transmission shaft.
4.
Install drive hub and engage splines of drive hub to
splines of transmission input shaft.
5.
Install driven clutch nut. Tighten nut to specified
torque.
6.
Install drive clutch stationary sheave. See “Drive Belt
Installation” on page 7.6.
Driven Assembly Nut Torque
50-54 ft-lbs (68-73 Nm)
E
F
New
Driven Clutch Nut Torque
40 ft-lbs (55 Nm)