![background image](http://html2.mh-extra.com/html/razor/ground-force/ground-force_controller-installation-manual_4022560001.webp)
Need Help?
Visit our website for additional video instructions at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday
8:00am - 5:00pm Pacifi c Time.
Figure 1a
Figure 1b
Figure 1c
Using the supplied 5mm Allen wrench, remove the
Allen head screws that attach the battery/motor cover
to the frame (see Figure 1a).
The battery/motor cover is designed to be removed
without removing the seat (see Figure 1b), but it may
ease removal if the seat is removed.
The controller is located on the switch/charge-plug
mounting bracket (see Figure 1c).
GROUND FORCE™
CONTROLLER INSTALLATION GUIDE
1
Step 1a: Remove the motor cover
Step 1b:
Step 1c:
Figure 2a
Carefully unplug all wiring connections to the
controller (see Figure 2a).
Step 2a: Unplug the wire connections
CAUTION: To prevent shock, turn power switch off before installing the new controller.
C
D
This kit includes:
A -
5mm Allen wrench
B
- Adapter
C
- Qili™ Charger
D
- Controller (CT-201C)
NOTE:
The supplied adapter (6-pin connector on one
end and 4-pin & 2-pin connectors on the other end) is
only applicable to certain Ground Force products.
If your existing controller has a 6-pin connector, the
replacement controller will require use of the adapter.
•
The 6-pin connector of the adapter should
be connected to the Ground Force.
•
The 4-pin & 2-pin connectors of the adapter
should be connected to the new controller.
If your existing controller already has a 4-pin and a 2-pin
connection, disregard connecting the supplied adapter.
A
B