5.20
BODY / SUSPENSION / STEERING
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
Swing Arm Removal
1.
Remove the plastic tie strap retaining the brake lines
to the swing arm.
2.
Slightly elevate the rear end of the vehicle off the
ground.
3.
Remove the (2) bolts retaining the rear brake caliper
and remove the caliper from the disc. CAUTION: Do
not hang the caliper by the brake line. Use a strap or
mechanics wire to hang caliper to prevent damage to
the brake line.
4.
Loosen all (4) axle housing bolts.
5.
Loosen the outer jam nut and back off the inner
adjustment nut on each chain adjuster to remove
tension.
6.
Using mechanics wire or a long Panduit strap, tie the
chain tensioner back out of the way.
7.
Remove the upper shock mounting bolts.
CAUTION
Severe injury could occur if machine tips or falls.
Remove
Remove
Loosen
Loosen
Chain
Tensioner
Remove