8.6
ELECTRICAL
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
TAIL LIGHT
Tail Light Lamp Replacement
If the tail light lamp does not work, the lamp may need to
be replaced.
1.
Remove the two screws securing the lens cover and
remove the lens cover.
2.
Remove the lamp and replace it with a new
(recommended) lamp. Apply Dielectric Grease (PN
2871329) to the lamp terminals.
3.
Test the light for proper operation.
4.
Reinstall the lens cover.
INDICATOR LAMPS
Indicator Lamp Replacement
1.
The indicator lamps are located on the dash.
2.
Disconnect the indicator light wire connections from
the harness.
3.
Remove the nut from the backside of the indicator
lamp.
4.
Remove the lamp.
5.
Install new lamp(s) into the dash and secure with
retaining nut.
6.
Apply dielectric grease to the wire connections of the
new lamp.
7.
Turn ignition key to the “ON” position and shift the
transmission into “Neutral” or “Reverse” to verify light
operation.
8.
If the lights do not operate, check battery voltage at
the light harness and check related wiring for possible
malfunction.