Accessing the Vehicle
Your new Morgan Olson Route Star van body includes 4 keys types.
The position of the side door handle lock cylinder will
indicate a locked or unlocked condition.
Pushed in - is the locked position.
Out - is the unlocked position.
Bulkhead Door Operation
Ignition Key
Side Door Key
Bulkhead & Rear
Door Key
Overhead
Compartment
Key
1. Press and hold fob button.
2. Bulkhead door automatically opens and remains open until driver
manually closes door.
3. Door automatically latches and locks when door closes.
** Bulkhead keyless latch may not automatically release fully
when vehicle is parked on an uneven surface.
Manual Operation
1. From the Cab area, using the bulkhead door key, insert into the
bulkhead lock and turn clockwise to manually release the bulkhead latch.
2. From the cargo area, use the thumb release and slide it away from
door to release the bulkhead latch.
Starting & Stopping
Starting
1. Tap fob button once.
2. Back light on Engine Start / Stop switches begin flashing.
This indicates that a Valid ID has been detected.
3. Within 5-seconds, press the Engine Start button once to initiate truck
start sequence.
4. Press the Engine Start button a 2nd time to crank starter.
5. Release Engine Start button when engine turns over.
The truck is now in ‘Run’ mode.
(
If truck did not start
, the Engine Start button can be pressed again
within 5-seconds of releasing the Engine Start button to try and re-crank
the truck starter motor.)
Stopping
1. If the engine is running AND the truck is stopped, press the Engine
Stop button.
2. The truck engine will turn off.
3. Press the Stop button again and the bulkhead door will open.
** Bulkhead keyless latch may not automatically release fully when
vehicle is parked on an uneven surface.
