95
To adjust the temperature, press the “ВРЕМЯ / ТЕМПЕРАТУРА / TIME / TEMPERATURE” button and use the “+ and -”
touch buttons to select the desired temperature mode: 100, 103, 106, 109, 112, or 115°С.
- When operating in the no pressure mode, the time and temperature settings may be changed during cooking.
Change the parameters by pressing the “+ and -” touch buttons.
- Please bear in mind that the total cooking time, i.e. the time elapsed plus the new time setting, must not exceed the
maximum operation time determined for the program selected.
- Press the “СТАРТ / ОТМЕНА / START / CANCEL” touch button to start the program, the program will give off a sound
signal, and the multicooker will begin operating according to the program selected. The “Grains” sign on the display
and the “СТАРТ / ОТМЕНА / START / CANCEL” touch button indicator will remain on. The countdown timer for the
cooking time will start after the program begins.
- After the program is complete, the appliance will switch to the ПОДОГРЕВ / KEEP WARM mode. To disable automatic
switching to the ПОДОГРЕВ / KEEP WARM mode, press the “ДАВЛЕНИЕ / ОТМЕНА ПОДОГРЕВА / PRESSURE /
CANCEL KEEP WARM” touch button, a signal will sound, and the “ПОДОГРЕВ / KEEP WARM” indicator on the display
will go out. You can activate automatic switching into the ПОДОГРЕВ / KEEP WARM mode again later by pressing the
“ДАВЛЕНИЕ / ОТМЕНА ПОДОГРЕВА / PRESSURE / CANCEL KEEP WARM” touch button.
- If necessary, the program’s execution may be canceled by pressing the “СТАРТ / ОТМЕНА / START / CANCEL” touch
button. In doing so the appliance will switch to standby mode.
- The multicooker will give off a sound signal upon completion of the program. The appliance will automatically switch
into the ПОДОГРЕВ / KEEP WARM mode unless it was previously disabled. In the ПОДОГРЕВ / KEEP WARM mode, the
display will show the forward time count (in hours) indicating the dish’s heating time.
- To turn the heating mode off, press the “СТАРТ / ОТМЕНА / START / CANCEL” touch button and the appliance will
switch into standby mode. Turn off the appliance.
Advice:
the liquid level must not exceed maximum capacity.