76
mode, perform additional lid blocking by turning the handle into the “Close” position. The electric
valve will remain open in the no pressure mode, and steam will be released from the appliance
through the steam separator holes in the lid.
• Select and start the desired program.
• If the pressure inside the bowl is higher than atmospheric pressure, it will not be possible to
turn the lid handle into the “Open” position until the excess bowl pressure is released. In order
to immediately open the lid while operating in pressure mode, you must stop the program in
operation by pressing the “СТАРТ / ОТМЕНА / START / CANCEL” touch button. In doing, so the
automatic valve will release excess pressure into the atmosphere.
• Do not press the lid opening button if the lid handle is in the “Close” position. It may result in bowl
or appliance case damage. WARNING! THE LID OPENING BUTTON IS NOT BLOCKED!
• In pressure mode, any steam escaping from under the lid of the device or from any other part of
it besides the pressure valve is an indication of a malfunction. In such a case, clean off the upper
edge of the bowl and the sealing ring on the multicooker lid and verify that the device is properly
assembled. If the problem reoccurs, you must not operate the device any longer. Please contact the
service center for repair.
• While the multicooker is in use, in addition to the main indication on the appliance display,
additional indication and sound signals will be used:
• Thus, the red indicator above the “СТАРТ / ОТМЕНА / START / CANCEL” touch button will
indicate that the multicooker is executing the selected program and the yellow indicator above the
“ОТЛОЖЕННЫЙ СТАРТ / DELAYED START” touch button means that the multicooker is in delayed
start mode.
• When the program is finished, the appliance will make a long melody sound and the display will
show the “End” notice, which is reset in few minutes.