75
Current time setting
1. Press the “ДАВЛЕНИЕ / ОТМЕНА ПОДОГРЕВА / PRESSURE / CANCEL KEEP WARM” and the
“МУЛЬТИПОВАР PLUS” touch buttons simultaneously, a signal will sound, and the display timer
will start blinking.
2. Set the current time using the “+” and “-” touch buttons (“+” button for hours, “-” button for
minutes).
3. After that, press the “СТАРТ / START” touch button, a signal will sound, the timer will stop
blinking, and the current time will be saved in the appliance memory.
General operation procedure in ДАВЛЕНИЕ / БЕЗ ДАВЛЕНИЯ / PRESSURE / NO PRESSURE
mode
• Set the bowl with your products into the multicooker, ensure it is properly aligned (by slightly
turning it from side to side), and make sure the bowl handles get into the corresponding socket on
the case.
• Close the multicooker lid until the lid opening button clicks. If the bowl is installed correctly and
the case is not damaged, this action will not require significant effort.
• Plug the multicooker into the mains socket.
• Turn the lid handle into the “Close” position. If this step is done correctly, the display will show
the corresponding indicator confirming that the appliance has detected the handle position. If
the lid handle is in “Open” position, the multicooker will not switch into pressure mode. When a
program without a pressure mode is selected, the lid handle will not need to be closed.
• If the recipe entails the use of water and a temperature of more than 100°С in the no pressure