E-18
Using USB Memory
• The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and USB memory storage
starts after the scrolling completes.
The (5 second) flashing “US” display indicates that the USB memory has not been inserted. Please insert
the USB memory and then press the Save button.
A (5 second) flashing “FL” display indicates that there is insufficient free capacity to permit storage in
USB memory. Replace with a USB memory device having sufficient capacity.
See “Meaning of Error Messages” on Page E-46 for other error displays.
Note
• Depending on the USB memory, it may take time for recognition or it may take time for saving.
• When the ON/Standby button is pressed during the reading operation, the reading operation will be discontin-
ued and the partially read image data will be stored in the USB memory.
To move the sheet surface, wait until scrolling stops, then press the Scroll/Stop button.
• The date and time of the saved file will reflect the captureboard time setting. See “CB Setup” on Page E-31.
• When a certain amount of free capacity is not available in the USB memory, “FL” will be displayed when the Save
button is pressed. Delete data, set the sheet surface back to the original status, then press the Save button
again.
• When the captureboard and a computer are connected by USB cable, the data is stored in the main unit’s internal
memory.
Flashing indicator “rotates” sequentially during USB memory
storage operation.
Display window
Press the Save button to store.
Removing the USB memory
Check that the flashing rotation of the display window has changed to steady
lighting and that the USB memory access indicator is not flashing, then pull the
USB memory straight out. (Please see your USB memory manual for details.)
Notice
• Do not unplug the USB memory device during the USB memory stor-
age operation (i.e., during the rotating, flashing display in the display
window), or while the access indicator of the USB memory device is
flashing because data will be destroyed.
When the captureboard is not going to be used, press the ON/Standby button and switch
off the power (standby mode).
Note
• “
” letters appearing at one-second intervals in a moving display in the display window indicate that a USB
memory device is mounted. Unplugging the USB memory device will switch off the power. (A function that serves
as a reminder to unplug the USB memory device)
• When the captureboard and a computer are connected by USB cable, the auto power off function (which turns the
power off automatically) is canceled.
• Scanned image files stored in the memory for computer storage are deleted when the ON/Standby button is
turned off. Files in the memory for network storage are not deleted.
https://www.supplychimp.com/
