PLEXPACK MPS6100, Product Documentation

Page: 43 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 15
4.2 REMOVING PRODUCT CONVEYING BELTS
1) It is necessary to follow the lockout procedure 3.1, and be aware of section 3.2 which
states the cooling times of the sealing bars before continuing.
2) If your sealer is equipped with a trimmer, embosser, or printer, you must remove these
units first. Please refer to the appropriate Addendum to this manual for instructions on
how to remove these units properly.
3) The entire in-feed rail must be removed from the head section in order to replace the
product conveying belts. It is recommended that two people aid in this procedure. As
one person supports the rail section, have the other person unscrew and remove the
thumb screws that allow the rails to swing down.
FIGURE - 14
Pressure Plates
Cooling Bars Heating Bars
Quick-
Release
Handle