PLEXPACK MPS6100, Product Documentation

Page: 44 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 16
4) Next, as one person is supporting the rails in the original upright sealing position, the
other person needs to remove the two screws that are located in the rails’ hinges found
under the control box.
5) Completely remove the rails from the machine.
6) Remove the two bridges that join the rails together shown in Figure 15, by removing the
Phillips screws located on the opposite side. There are four screws for each bridge that
need to be removed.
7) With a Phillips screwdriver, remove all the protective covers.
8) Loosen, but do not remove, the tension pulley located in the bag entry guides at the end
of the in-feed rail as shown in Figure 15 (i.e. the pulley that rides in the slot) by loosening
its bolts located on the top face.
9) Remove the guide covers shown in Figure 15. A bag entry guide is removed in the
Figure to show the guide cover location. Do not remove the bag entry guides.
10)
The belt can now be removed by unwinding it from the drive pulley section, and un-
wrapping it from both tension pulleys.