PLEXPACK MPS6100, Product Documentation

Page: 45 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 17
4.3 INSTALLING PRODUCT CONVEYING BELTS
1) At this point it is assumed that you have already completed the procedure in section 4.2.
2)
Feed the conveying belts around the pulleys on both ends and thread it through the
driving pulleys.
3)
Tighten the in-feed pulleys.
4)
Attach the two bridges that join the rails together, by tightening the Phillips screws
located on the bottom of the rails.
5)
Next, as one person is supporting the rails in the original upright sealing position, the
other person needs to insert & tighten the two screws that are located in the rails’ hinges
found under the control box.
6) Raise the in-feed rails as per section 3.5. Leave the machine on for the following step.
Bridges
Tension
Pulleys
FIGURE - 15
Bag Entry
Guide