PLEXPACK MPS6100, Product Documentation

Page: 52 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 24
X20AT2402 T/C channel2-
above upper limit Zone 2 below above
temp upper limit
a. Allow sealer to cool down zone 2 to set value
X20AT2402 T/C channel2-
wire break Zone 2 thermocouple
wire broken
a. Replace thermocouple in zone 2
X20AT6402 T/C channel1-
below lower limit Zone 1 back bar below
lower temp lower limit a. Allow sealer to heat up zone 1 back bar to set
value
X20AT6402 T/C channel1-
above upper limit Zone 1 back bar below
above temp upper limit a. Allow sealer to cool down zone 1 back bar to
set value
X20AT6402 T/C channel1-
wire break
Zone 1 back bar
thermocouple wire
broken
a. Replace thermocouple in zone 1 back bar
X20AT6402 T/C channel2-
below lower limit Zone 1 front bar below
lower temp lower limit a. Allow sealer to heat up zone 1 front bar to set
value
X20AT6402 T/C channel2-
above upper limit Zone 1 front bar below
above temp upper limit a. Allow sealer to cool down zone 1 front bar to
set value
X20AT6402 T/C channel2-
wire break
Zone 1 front bar
thermocouple wire
broken
a. Replace thermocouple in zone 1 front bar
X20AT6402 T/C channel3-
below lower limit Zone 2 back bar below
lower temp lower limit a. Allow sealer to heat up zone 2 back bar to set
value
X20AT6402 T/C channel3-
above upper limit Zone 2 back bar below
above temp upper limit a. Allow sealer to cool down zone 2 back bar to
set value
X20AT6402 T/C channel3-
wire break
Zone 2 back bar
thermocouple wire
broken
a. Replace thermocouple in zone 2 back bar
X20AT6402 T/C channel4-
below lower limit Zone 2 front bar below
lower temp lower limit a. Allow sealer to heat up zone 2 front bar to set
value
X20AT6402 T/C channel4-
above upper limit Zone 2 front bar below
above temp upper limit a. Allow sealer to cool down zone 2 front bar to
set value
X20AT6402 T/C channel4-
wire break
Zone 2 front bar
thermocouple wire
broken
a. Replace thermocouple in zone 2 front bar
Zone 1 Pressure Sensor -
lower value exceeded Zone 1 pressure below
lower limit
a. Allow sealer to increase pressure in zone 1
Zone 1 Pressure Sensor -
upper value exceeded Zone 1 pressure above
upper limit
a. Allow sealer to decrease pressure in zone 1
Zone 1 Pressure Sensor -
open line Open pneumatic line on
zone 1 plumbing
a. Investigate plumbing of zone 1 pneumatics
from back control box fitting to seal section
cylinders
Broken Teflon Band Front Front teflon band broken
a. Replace front telfon band
b. See section 4.1 for procedure