PLEXPACK MPS6100, Product Documentation

Page: 17 / 76

MPS6100 OPERATION MANUAL
ORIGINAL INSTRUCTIONS Page 9
1) CURRENT USER: shows the current user logged on to the machine. This is part of
the top banner shown on all menus. “Operator” is the default user and has limited
capabilities in selections. The “Operator” can choose recipes, stop and start the machine,
and view diagnostics and alarms. They cannot setup parameters, create recipes, setup
configurations, or reset the product count. To adjust these settings the user must log on
to “Technician”; see maintenance manual for password. Only authorized technicians
should log on as “Technician”.
2) DATE/TIME: the current date and time. This is also part of the top banner shown on
all menus. See maintenance manual for procedure to change the date and/or time.
3) START: turns on the sealer motor, heater cartridges (for the seal section) and other
options attached to the machine, if available. Note the sealer will not start if the
emergency stop (e-stop) is engaged. The e-stop is disengaged by pulling and
simultaneously twisting the e-stop clockwise. The large “START” icon on the home
screen has the same functionality as the “Start” icon on the left margin of the home
screen.
FIGURE - 6
FIGURE - 6
1
2
3
8
5
4
6
7
9
10
11
13
14
15