MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS
Page 7
2.0
MACHINE ALARMS AND DIAGNOSTICS
2.1
MACHINE ALARMS
An alarm is activated when the alarm indicator in the top right corner of the HMI is yellow.
To see the activated alarm, press the “Alarm” icon on the right margin. See Figure 9 for screenshot.
Pressing the “History” icon will show all alarms activated since the
most recent
startup of
the machine. See section 7 for the alarm index which shows all possible alarms and their
description.
2.2
DIAGNOSTICS
Pressing the “Diagnostics” icon brings up Figure 10 on the HMI. This shows the current
status of the SDM, system, software and hardware of the PLC and its components. Most of this
information is for OEM technicians to observe certain functionality of the PLC and its components
during troubleshooting, updating, initial setup, etc. The main diagnostic tool to observe is the
system dump. This allows the service technician to dump all of the recent system, software,
hardware and alarm history on a USB to send to the OEM for further analysis. This should be done
if there are issues with the machine that cannot be easily fixed or when Plexpack technical support
has requested it.
FIGURE - 9
Summary of Contents for MPS6100
