PLEXPACK MPS6100, Product Documentation

Page: 34 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 6
If the setup parameters or configurations of the sealers active recipe have been changed and
wish to be saved, click “Save”. See sections 1.2 and 1.3 to change the setup parameters and
configurations, respectively.
If the situation arises that more recipes are needed on the sealer for a new product line, bag
size, etc. a new recipe can be created. Click “Create” and the create recipe screen will appear on the
HMI, as shown in Figure 8. Type the recipe name for the new recipe in the text box to the right of
“Name”.
All the sealer parameters must now be inputted into the recipe configurator. Press the
desired parameter icon to view their respective setup screen. See section 1.3 for setup procedure of
speed and temperature parameters and the applicable manual for the embosser and VGF for their
setup procedure. The MPS6100 machines only have the option of manual manipulation of pressure
via spring-loaded pressure plates attached to the seal and cooling bars, hence, pressure parameters
are unavailable. Press the “Back” icon on the bottom left corner to return to the “Create New
Recipe” screen once a parameter setup screen has been filled out.
Once all parameters have been filled out, press the “Create” button and the new recipe will
populate the recipe list. If it fails to appear, press the refresh button on the recipe screen.
FIGURE - 8