Planex FMG-24K, User Manual

Page: 221 / 263

16.IGMP Snooping Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the
ports containing hosts requesting a service and sends data out to those ports
only. It then propagates the service request up to any neighboring multicast
switch/router to ensure that it will continue to receive the multicast service.
Command Function Mode Page
Basic IGMP Commands
ip igmp snooping Enables IGMP snooping GC 3-108
ip igmp snooping vlan Adds an interface as a member of a GC 3-109
static multicast group
ip igmp snooping Configures the IGMP version for
version snooping GC 3-109
show ip igmp snooping Shows the IGMP snooping configuration PE 3-110
show bridge multicast Shows the IGMP snooping MAC PE 3-111
multicast list
IGMP Querier Commands
ip igmp snooping Allows this device to act as the querier for GC 3-112
querier IGMP snooping
ip igmp snooping Configures the query count GC 3-112
query-count
ip igmp snooping Configures the query interval GC 3-113
query-interval
ip igmp snooping Configures the report delay GC 3-114
query-max-response-ti me
ip igmp snooping Configures the query timeout GC 3-114
query-time-out
show ip igmp snooping Shows the IGMP snooping configuration PE 3-110
Mulitcast Router Commands
ip igmp snooping vlan Adds a multicast router port GC 3-115
mrouter
show ip igmp snooping Shows multicast router ports PE 3-116
mrouter
219