databits
Use this command to set the number of data bits per character that are interpret-
ed and generated by the console port. Use the no form to restore the default
value.
Syntax
databits {7 | 8}
no databits
> 7 - Seven data bits per character.
> 8 - Eight data bits per character.
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from devices
that generate 7 data bits with parity. If parity is being generated, specify 7 data
bits per character. If no parity is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#
Related Commands
parity
168
