Planex FMG-24K, User Manual

Page: 17 / 263

4.System Defaults
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file should be set
as the startup configuration file (see “Setting the Startup Configuration File” on
page 2-18).
The following table lists some of the basic system defaults.
Function Parameter Default
IP Settings Management. VLAN 1
DHCP Disable
BOOTP Disabled
User Specified Disabled
IP Address 192.168.0.1
Subnet Mask 255.0.0.0
Default Gateway 0.0.0.0
Web Management HTTP Server Enabled
HTTP Port Number 80
SNMP Community Strings “public” (read only)
“private” (read/write)
Authentication Failure Enabled
Traps
Link-up-Down Traps Enabled
Security Privileged Exec Level Username “admin”
Password “admin”
Normal Exec Level Username “guest”
Password “guest”
Enable Privileged Exec Password “super”
from Normal Exec Level
RADIUS Authentication DisabledConsole Port
16