Adding Interfaces Based on Static Membership
Command Attributes
> Interface – Port or trunk identifier.
> Member – VLANs for which the selected interface is a tagged member.
> Non-Member – VLANs for which the selected interface is not a tagged mem-
ber.
Web – Open VLAN/VLAN Static Membership. Select an interface from the scroll-
down box (Port or Trunk). Click “Query” to display VLAN membership information
for the interface. Select a VLAN ID, and then click “Add” to add the interface as a
tagged member, or click “Remove” to remove the interface. After configuring
VLAN membership for each interface, click “Apply.”
CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3
from VLAN 2.
Console(config)#interface ethernet 1/3
3-68
Console(config-if)#switchport allowed vlan add 1 tagged
3-99
Console(config-if)#switchport allowed vlan remove 2
69
