Web – Click VLAN/VLAN Port Configuration or VLAN Trunk Configuration. Fill in
the required settings for each interface, click “Apply.”
CLI – This example sets port 1 to accept only tagged frames, assigns PVID 3 as
the native VLAN ID, enables GVRP, sets the GARP timers, and then sets the
switchport mode to hybrid.
Console(config)#interface ethernet 1/1
3-68
Console(config-if)#switchport acceptable-frame-types tagged
3-96
Console(config-if)#switchport ingress-filtering
3-97
Console(config-if)#switchport native vlan 3
3-98
Console(config-if)#switchport gvrp
3-102
Console(config-if)#garp timer join 10
3-104
Console(config-if)#garp timer leave 90
3-104
Console(config-if)#garp timer leaveall 2000
3-104
Console(config-if)#switchport mode hybrid
3-95
Console(config-if)#
72
