> Trunk – Indicates if a port is a member of a trunk. To create trunks and select
port members, see “Port Trunk Configuration” on page 2-61.
Autonegotiation must be disabled before you can configure or force the interface to
use the Speed/Duplex Mode or Flow Control options.
Web – Click Port/Port Configuration or Trunk Configuration. Modify the required
interface settings, and click “Apply.”
CLI – Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/13
3-68
Console(config-if)#description RD SW#13
3-68
Console(config-if)#shutdown
3-73
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
3-70
Console(config-if)#speed-duplex 100half
3-69
Console(config-if)#flowcontrol
3-72
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
3-71
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
46
