Pitney Bowes SendPro P1500 User Manual Download Page 44

Page: 44 / 219

1. Sort the mail by envelope size.

2. Shingle envelopes (slant the stack as shown) so the bottom envelope feeds first. All envelopes

in a single stack should be the same size.

3. Place the stack of mail on the feed deck. Place the envelopes with the flaps down and against

the rear wall.

4. Make sure the envelopes are pushed far enough so that they cover the feed sensor located on

the feed deck near the rear wall.

5. Adjust the side guide so it is close to, but not touching, the bottom edge of the envelope stack.

Be sure and leave a slight clearance between the side guide and envelopes (about 1/16 inch
clearance).

6. Use the thickness adjustment knob to adjust for envelope thickness.

For large stacks of thin mail, such as single inserts or post cards, the thin mail setting may
be needed for better performance.

To pick a setting, turn the knob so the setting aligns with the pointer nearby.

Reviewing the mailpiece specifications

Running mail

Pitney Bowes

User Guide April 2022

Summary of Contents for SendPro P1500




























































































































































































































Search results

Summary of Contents for SendPro P1500

Reviews:

Brands by name

Popular brands

Pitney Bowes SendPro P1500, User Manual

Search results

Summary of Contents for SendPro P1500

Reviews:

Brands by name

Popular brands