This reduces the wear on your machine and acts as a safety measure if you leave the machine
unattended.
1. Select
Settings
under Mailing on the Home screen.
2. Select
Hardware
from the list on the left side of the screen.
3. Select
Feeder
.
4. Select
Edit
next to the Waiting for envelopes timeout.
5. Select the appropriate length of time.
l
Select
Stop machine automatically after rollers stop
if you want the feeder to stop after
the last envelope is processed.
l
Select
Wait for envelopes until stop is pressed
if you want the feeder to continue running
until you press the Stop button.
l
Select
Wait for envelopes for:
if you want the feeder to continue running for a short
amount of time after the last envelope is processed. Select and drag the control button to
adjust the timeout. Use the + and - buttons for a more precise selection.
6. Select
OK
to accept any changes you have made.
7. Select the
Home
button to return to the Home screen.
Changing the scale vibration setting
You can turn the vibration filter on if your mailing system is in an environment subject to vibrations,
such as near air-conditioning vents or closing doors. If you select this, the scale will require more time
to settle before displaying a weight.
1. Select
Settings
under Mailing on the Home screen.
2. Select
Hardware
from the list on the left side of the screen.
3. Select
Attached scale
.
4. Select
Adjust for motion
to enable the vibration filter. Select
Normal
to disable the vibration
filter.
5. Select the
Home
button to return to the Home screen.
Zeroing the scale
You may need to zero the scale if the scale will not display zero weight.
System Setup
Pitney Bowes
User Guide April 2022
195
