Pioneer XY-122, Installation Manual

Page: 49 / 92

3 Rigging And Caster Setting
___________________________________________________________________________________________________________
3.2.7 Caster
Part list (CP-XYCS1)
Item Part Name Qty Service Part No. Note
Required tools
1
Caster 4 -
・
Screwdriver
2 M8 hex head bolt 17 06C005
3
Spring washer 17 06D011
4
Flat Washer 17 06D009
・
13mm hex spanner
Procedure
(1)
(2)
(3)
Using the four supplied M8 Hex head bolts(B), align the mounting
points on the rear of the enclosure and the four holes on each
Caster (A). Ensure that both Spring washer(C) and Flat washer(D)
are used - the Flat washer(C) should be in contact with the
Caster(A). Tighten the bolts at 7N·m torque. (Fig.3-2-7-B)
Turn the XY-118S/215S/218HS enclosure with its grille up to roll on
the casters. (Fig.3-2-7-C)
The mounting points for casters to help moving the loudspeakers are on
the rear side of XY-118S/215S/218S/218HS.
M8 x 30mm (P=1.25)
13mm hex head
M8
M8
Unscrew the sixteen pre-inserted mounting screws on the rear of
XY-118S/215S/218S/218HS. (Fig.3-2-7-A)
Fig.3-2-7-B
(B)
(D)
(C)
(A)
Fig.3-2-7-C
Fig.3-2-7-A
NOTE: XY-118S is shown in the illustration.
http://pioneerproaudio.com/
Page 49 / 92
©2018 Pioneer DJ CORPORATION