Pioneer XY-122, Installation Manual

Page: 36 / 92

3 Rigging And Caster Setting
__________________________________________________________________________________________________________
Part list (CP-XY12DF1/CP-XY15DF1)
Part list (CP-XY3DF1)
Procedure (CP-XY12DF1/CP-XY15DF1)
(1)
(2)
Remove the eight pre-inserted mounting screws on the top and the
bottom of 2 units of XY-122/152. (Fig.3-2-4-A)
Using the supplied M10 socket head bolts(B), tentatively align the
mounting holes on the Dual enclosure flying plate(A) with the mounting
points of the top and the bottom of the enclosure. Ensure that both the
Spring washer(C) and Flat washer(D) are used in between the Dual
enclosure flying plate(A) and the M10 socket head bolt(B). Tighten the
bolts at 15N·m torque. (Fig.3-2-4-B)
Fig.3-2-4-A
Fig.3-2-4-B
NOTE: XY-122 is shown in the illustration.
(A) (B)
(C)
(D)
Required tools
・
Screwdriver
・
8mm hex key
・
16mm hex
spanner
Required tools
・
8mm hex key
Item Part Name Qty Service Part No. Note
1 Dual Enclosure Flying Plate 1 - -
2 Rear Plate Top 1 10B917L -
3 Rear Plate Bottom 1 10B917S -
4 M10 socket head bolt 9 06B522
M10 x 20mm (P=1.5),
8mm hex socket head,
Included spare:1
5 Spring washer 9 06D015 M10, Included spare:1
6 Flat washer 9 06D014 M10, Included spare:1
Item Part Name Qty Service Part No. Note
1 Dual Enclosure Flying Plate 2 -
2 M10 socket head bolt 9 06G053
M10 x 40mm (P=1.5),
8mm hex socket head
Included spare:1
3 Spring washer 9 06D015 M10, Included spare:1
4 Flat washer 13 06D014 M10, Included spare:1
5 Nut 3 06E012
M10, Included spare:1
16mm width across flat
6
M8 socket head bolt
(Only CP-XY12DF1)
3 06G046
M8 x 30mm(P=1.25),
6mm hex socket head
Included spare:1
7
M8 flat washer
(Only CP-XY12DF1)
5 06D009 M8, Included spare:1
8
M8 nut
(Only CP-XY12DF1)
3 06E010
M8, Included spare:1
13mm width across flat
http://pioneerproaudio.com/
Page 36 / 92
©2018 Pioneer DJ CORPORATION