Pioneer XY-122, Installation Manual

Page: 38 / 92

3 Rigging And Caster Setting
__________________________________________________________________________________________________________
(3)
(4)
(5)
Procedure (CP-XY3DF1)
(1)
The XY-122/152 enclosure can be suspended from the ceiling when using
two commercially-available M10 eyebolts as shown in the figure below.
(Fig.3-2-4-G)
Remove the four pre-inserted M10 mounting screws on the rear side of
XY-122/152 enclosure.
Ensure the four commercially-available M10 eyebolts are secured to the
mounting points on the rear side of the XY-122/152 enclosures to
suspend it with wire as a secondary safety feature. (Fig.3-2-4-H)
Using the supplied M10 socket head bolts(B), align the mounting holes on
the Dual enclosure flying plate(A) with the mounting points of the top of
the enclosure. Ensure that both the Spring washer(C) and Flat washer(D)
are used in between the Dual enclosure flying plate(A) and the M10
socket head bolt(B). Tighten the bolts at 15N·m torque. (Fig.3-2-4-I)
WARNING:
・
When assembling cluster using the CP-XY3DF1, the top of each
enclosure must be fixed with the proper mounting holes on top plate(A)
as following figure.
Commercially-
available
eyebolt
Commercially-
available
eyebolt
Fig.3-2-4-G
Fig.3-2-4-H
Mounting holes on the top plate
(A)
(B)
(C)
(D)
Fig.3-2-4-I
http://pioneerproaudio.com/
Page 38 / 92
©2018 Pioneer DJ CORPORATION