Message
Cause
Action (See)
FILE Skipped
The inserted disc contains WMA
files that are protected by DRM
Replace disc.
PROTECT
All the files on the inserted disc are
secured by DRM
Replace disc.
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message
Cause
Action
Error. Please check MIC.
Microphone is not connected.
Plug the supplied microphone securely into
the jack.
Error. Please check front SP.
,
Error. Please check FL SP.
,
Error. Please check FR SP.
,
Error. Please check center SP.
,
Error. Please check rear SP.
,
Error. Please check RL SP.
,
Error. Please check RR SP.
,
Error. Please check rear center
SP.
,
Error. Please check sub-
woofer.
The microphone cannot pick up the
measuring tone of a speaker.
!
Confirm that the speakers are connected
correctly.
!
Correct the input level setting of the power
amp connected to the speakers.
!
Set the microphone correctly.
Error. Please check noise.
The surrounding noise level is too
high.
!
Stop your car in a place that is as quiet as
possible, and switch off the engine, air condi-
tioner or heater.
!
Set the microphone correctly.
Additional Information
En
127
Appendix
Additional
Information