Introduction of advanced
tuner operation
1
1
Function display
Shows the function names.
1
Touch AV MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
2
Touch ESC to return to the frequency
display.
#
To return to the previous display, touch
BACK
.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Touch LOCAL on the function menu to
set the sensitivity.
Touch
LOCAL
repeatedly until the desired level
of sensitivity appears in the display.
There are four levels of sensitivity for FM and
two levels for AM:
FM:
OFF
—
LEVEL1
—
LEVEL2
—
LEVEL3
—
LEVEL4
AM:
OFF
—
LEVEL1
—
LEVEL2
The
LEVEL4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning keys
P1
—
P6
and once stored there you can tune in to those
frequencies with the touch of a key.
%
Touch BSM on the function menu to
turn BSM on.
BSM
begins to flash. While
BSM
is flashing
the six strongest broadcast frequencies will be
stored under preset tuning keys
P1
—
P6
in
order of their signal strength. When finished,
BSM
stops flashing.
#
To cancel the storage process, touch
BSM
again.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using
P1
—
P6
.
Tuner
En
31
Section
05
Tuner
