%
When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01
—
P12 until the beep
sounds.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
#
To switch between
P01
—
P06
and
P07
—
P12
,
touch
PREV
or
NEXT
.
#
When
P01
—
P06
and
P07
—
P12
are not dis-
played, you can display them by touching
LIST
.
Notes
!
Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
!
You can also use
a
and
b
to recall stations as-
signed to preset tuning keys
P01
—
P12
when
P01
—
P12
are not displayed.
Confirming current channel
and other settings
When watching a TV on the rear display, you
can display the reception information such as
the channel, band and preset channel list.
!
Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to
TV
.
(Refer to page 21.)
%
Press DIRECT to display the reception
information.
Each press of
DIRECT
displays reception infor-
mations in the following order:
Current channel information (channel and
band)
—
Preset channel list
—
Reception infor-
mations disappear
#
Reception informations are displayed for eight
seconds.
Storing the strongest
broadcast stations
sequentially
1
1
Function display
Shows the function names.
1
Touch AV MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
2
Touch BSSM on the function menu to
turn BSSM on.
BSSM
begins to flash. While
BSSM
is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished,
BSSM
stops flashing.
#
To cancel the storage process, touch
BSSM
again.
3
Touch ESC to return to the TV picture.
#
To return to the previous display, touch
BACK
.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01
—
P12
.
TV tuner
En
85
Section
18
TV
tuner
