Switching the sound settings
You can switch the acoustic sound field stored
in this unit according to the source you are lis-
tening to. For detailed instructions on creating
the acoustic sound field, refer to
Introduction
of sound settings
on the next page.
%
Touch SOUND SETTING on the audio
function menu to switch the sound setting.
Touch
SOUND SETTING
repeatedly to switch
between the following settings:
SETTING1
(user setting 1)
—
SETTING2
(user
setting 2)
—
SETTING3
(user setting 3)
—
AUTO
(setting created by auto TA & EQ)
#
You can also switch the sound setting by
pressing
SOUND SETTING
.
#
You cannot select
AUTO
when
NETWORK
has been selected. (Refer to
Switching the DSP
setting mode
on page 117.)
#
When
STANDARD
has been selected, you
cannot select
AUTO
if Auto TA and EQ has not
been carried out.
Switching between the
multi-channel output and
2-channel output
You can switch the output channel between
the multi-channel output and 2-channel out-
put according to the source you are listening
to.
!
Selecting
2CH
changes the audio settings
as below:
—
Both the front center and rear center
speakers are turned off automatically in
the speaker setting. (Refer to page 101.)
—
Both Dolby Pro Logic II/Dolby Digital EX
and DTS Neo:6 switch to
OFF
. (Refer to
page 94.)
%
Touch 2CH/Multi CH on the audio func-
tion menu to switch the mode.
Touch
2CH/Multi CH
repeatedly until the de-
sired mode appears in the display.
!
MCH
–
Multi-channel audio output
!
2CH
–
2-channel audio output (stereo)
#
You can also switch the output setting by
pressing
2ch/MULTI-CH
.
Audio Adjustments
En
96
Section
20
