Storing the adjusted audio
settings in memory
You can store the adjusted audio settings in
this unit for later recall.
1
Touch MEMORY.
2
Touch any of CUSTOM1, CUSTOM2 or
CUSTOM3 to store the adjusted setting.
3
Touch YES to store the current setting
into the selected sound setting.
#
To cancel the storage process, touch
CANCEL
.
Editing the name of sound
settings
The name displayed for sound settings
(
SETTING1
,
SETTING2
and
SETTING3
) can be
changed.
!
Each name can be up to 10 characters
long.
1
Touch any of SETTING1, SETTING2 or
SETTING3 on the sound setting menu.
2
Touch NAME EDIT.
3
Touch the letter you wish to input.
Key
What it does
Moves the cursor to the previous charac-
ter position.
Moves the cursor to the next character po-
sition.
Inputs the space.
ABC
/
123
Switches keypad between alphabet and
numeric.
Deletes letter by letter from the end of the
text.
4
Touch MEMORY to store the entered
name in memory.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
You can use this function only when
STANDARD
has been selected. (Refer to
Switching the DSP setting mode on page 117.)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
WARNING
To prevent accidents, never carry out auto TA and
EQ while driving. When this function measures
the car interior acoustic characteristics to create
an auto-equalizer curve, a loud measurement
tone (noise) may be outputted from the speakers.
CAUTION
!
Carrying out auto TA and EQ under the follow-
ing conditions may damage the speakers. Be
sure to check the conditions thoroughly be-
fore carrying out auto TA and EQ.
—
When speakers are incorrectly connected.
(e.g., When a rear speaker is connected to
a subwoofer output.)
—
When a speaker is connected to a power
amp delivering output higher than the
speaker
’
s maximum input power capabil-
ity.
!
If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in a drain on battery power. Be sure
to place the microphone in the specified loca-
tion.
Audio Adjustments
En
106
Section
20
