3
When you find the desired track (or
disc) touch SCAN again.
#
After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Using compression and
bass emphasis
You can use these functions only with a multi-
CD player that supports them.
Using COMP (compression) and DBE (dy-
namic bass emphasis) functions lets you ad-
just the sound playback quality of the multi-
CD player. Each of the functions has a two-
step adjustment. The COMP function balances
the output of louder and softer sounds at high-
er volumes. DBE boosts bass levels to give
playback a fuller sound. Listen to each of the
effects as you select them and use the one
that best enhances the playback of the track
or CD that you are listening to.
%
Touch COMPRESSION on the function
menu to select your favorite setting.
Touch
COMPRESSION
repeatedly to switch be-
tween the following settings:
OFF
—
COMP1
—
COMP2
—
OFF
—
DBE1
—
DBE2
#
If the multi-CD player does not support
COMP/DBE,
NO COMP
is displayed and
COMPRESSION
cannot be operated.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1
Play a CD that you want to program.
2
Touch ITS MEMORY on the function
menu.
3
Touch
or
to select the desired track.
4
Touch MEMORY to store the currently
playing track in the playlist.
MEMORY
is displayed briefly and the cur-
rently playing selection is added to your play-
list. The display then shows track number
again.
#
After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1
Select the repeat range.
Refer to
Repeating play
on the previous page.
2
Touch ITS PLAY on the function menu
to turn ITS play on.
Playback begins of those tracks from your
playlist within the previously selected
MULTI-CD
or
DISC
ranges.
#
If no tracks in the current range are pro-
grammed for ITS play, then
ITS EMPTY
is dis-
played.
#
To turn ITS play off, touch
ITS PLAY
again.
Multi-CD Player
En
56
Section
11
