Pioneer Super Tuner IIID+ AVH-P7800DVD, Operation Manual

Page: 105 / 144

3 Touch or to adjust the speaker out-
put level.
Each time you touch or it increases or de-
creases the speaker output level.
–
24dB to
+10dB
is displayed as the level is increased or
decreased.
#
The test tone rotates to the next speaker after
about two seconds from the last operation.
4 Touch STOP to stop the test tone out-
put.
Notes
!
If needed, select speakers and adjust their
‘
ab-
solute
’
output levels. (Refer to Adjusting the
speaker output levels on the previous page.)
!
You can store the adjusted setting in memory
by using
MEMORY . For details concerning op-
eration, refer to Storing the adjusted audio set-
tings in memory on the next page.
!
The adjusted speaker output level cannot be
stored by each listening position. This means,
memorizing a speaker output level for custom
setting overwrites the levels of all listening po-
sitions.
Adjusting the speaker output
levels finely
You can readjust the speaker output levels
using a test tone while listening to music.
1 Recall the speaker output level settings
you want to adjust.
Refer to Recalling the speaker output level set-
tings on the previous page.
2 Touch ADJ. next to SPEAKER LEVEL.
3 Touch or to adjust the speaker out-
put level.
Each time you touch or it increases or de-
creases the speaker output level.
–
24dB to
+10dB
is displayed as the level is increased or
decreased.
#
You cannot select speakers whose size is set
at
OFF
.
Notes
!
You can store the adjusted setting in memory
by using
MEMORY
. For details concerning op-
eration, refer to Storing the adjusted audio set-
tings in memory on the next page.
!
The adjusted speaker output level cannot be
stored by each listening position. This means,
memorizing a speaker output level for custom
setting overwrites the levels of all listening
positions.
Using the auto-equalizer
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 117.)
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to
Auto TA and
EQ (auto-time alignment and auto-equalizing)
on the next page).
You can turn the auto-equalizer on or off.
1 Touch AUTO EQ on the sound setting
menu.
#
You cannot use this function if auto TA and
EQ has not been carried out.
2 Touch ON to turn the auto-equalizer
on.
#
To turn auto-equalizer off, touch
OFF
.
Audio Adjustments
En
105
Section
20
Audio
Adjustments