PRV-9000 Operating Instructions
Approximately two minutes before a timer program begins, the recorder’s power
automatically switches ON. Pressing Standby/ON at this point stops the
recording session.
The instructions below apply to both Standard and Disc timer recording; however,
the example screen-shots are taken from a Standard timer recording session.
1. Load a recordable disc in to the recorder.
If loading an unformatted DVD-RW disc, it is automatically formatted as a
VR disc. This process requires approximately 40 seconds.
2. Press
SETUP
to display the Setup menu.
If disc timer recording is active, the first menu item is Disc Timer Rec.
Figure 6-1: Timer Recording Setup Menu
3. Confirm
Timer Rec
is highlighted on the menu or highlight
Disc Timer Rec
if
the disc timer option is active.
4. Press
ENTER
to call the menu.
Timer Recording program appears on screen with 8 available entry lines.
Figure 6-2: Up to 8 Timer Recording sessions
5. Begin entering information for the timer recording(s).
Move the joystick left/right to move the cursor left/right.
Move the joystick up/down to scroll through options within that line.
Press
ENTER
to retain the program line information.
Press
CLEAR
to erase the current entry.
6. Select a date up to one month in advance or choose a daily/weekly option.
7. Set the Recording Start time.
8. Set the Recording Stop time.
71
