PRV-9000 Operating Instructions
4 G
ETTING
S
TARTED
Before plugging in the PRV-9000 for the first time, verify that all cables are properly and
firmly connected. Once all equipment is linked, following the steps below for standard
operation.
Powering ON the system:
1. Press
STANDBY/ON
on the remote control of from the recorder’s front panel.
To return the recorder to Standby, press the button again.
2. Turn ON the TV or monitor.
3. Set the video input for the recorder according to the directions below.
(may use the remote control to set the recorder)
4.1 Initial
Setup
Most of the settings and functions are
accessed using on-screen displays.
These commands are navigated with
the joystick. The joystick is very
sensitive and only requires gentle
pressure in the required direction to
move the on-screen cursor.
Use the joystick to highlight the
various menus and options then press
ENTER
to select the highlighted item.
Information about the highlighted menu
or option is shown on the lower portion
of the screen.
Note: A summary of navigation controls i
listed under the HELP information.
SETUP
ENTER / Joystick
STANDBY / ON
4.1.1 Set the Clock
The clock must be set before using the timed recording function. The PRV-
9000 has an
automatic clock setup
feature but supports manual clock setting
as well. The following commands are based on using the remote control.
1. Press
SETUP
to reveal the Setup menu.
24
