PRV-9000 Operating Instructions
2.2.1 Connect Through S-Video Output
S-Video carries an image as separate color and luminance (brightness)
signals. These signals are transmitted through a single cable from the S-
Video Output port to the S-Video Input connection on the display device
(Figure 2-4). The PRV-9000 has multiple S-Video outputs for connecting
TVs, monitors, VCRs or other equipment.
Connect
S-Video Output
to a
S-Video Input on your TV or
monitor.
2.2.2 Connect Through Component Video Out
Component Video carries the picture as two separate color singles and a
luminance (brightness) signal. These signals are transmitted through a single
cable with each end providing three connectors. Join one set of cable
connectors to the recorder’s Component Video Out port then the other set to
the Component Video In connections on the display device (Figure 2-5).
There is a single Component Video Out port on the PRV-9000 recorder.
Connect
Component Video Output
to
a Component Video Out on your TV.
Note: To set the recorder for progressive scan through Component Video Out, refer
to chapter 9,
Initial Setup Menu
, Video In/out Settings.
13
