PRV-9000 Operating Instructions
The directions below provide step-by-step instructions to create a Program
List for a DVD-R or DVD-RW disc.
1. Load a disc in to the recorder.
The disc may be playing, paused or stopped. If the disc is playing, the
picture appears in the lower right corner of the screen.
2. Press the
SHIFT
button on the remote control.
3. Press
PROGRAM
(7 on the number pad) to access Program Play List.
4. Use the joystick to highlight
Title
or
Chapter
.
If selecting Chapter, use the joystick to
move up to enter the title number in the
appropriate box. press Enter to select
that title. All chapters for the Program List
entry must come from this title.
5. Use the joystick to move to the first Program List number field if the
cursor is not in the proper location.
6. Enter a title/chapter number for this program list.
title/chapter 8: press 8 on the number pad then press ENTER
title/chapter 16: press 1 and 6 then press ENTER
Note: To add a pause instead of a title or chapter, press the PAUSE button for
a Program List entry instead of entering a title/chapter number on that line.
7. Press
ENTER
after each number entered on a Program List entry field.
8. Continue adding numbers to complete the Program List.
9. Use the joystick to move the cursor down to
Program Memory
.
10. Select
ON
to activate the Program Memory and save the program list.
Each time this disc is loaded, the recorder automatically recalls the
Program List.
11. Press
PLAY
to begin Program List playback.
To play the List at a later time, press
SHIFT
, then
PROGRAM
.
66
