PRV-9000 Operating Instructions
2 C
ONNECTION
O
PTIONS
Become familiar the rear panel of the PRV-9000 before connecting other components.
1 -
AC IN
(power inlet)
2 -
Component Video Out (BNC ports)
to a TV or monitor with Component Video In
3 -
S-Video Output 1
(S-Video port)
to a TV ,monitor, AV receiver or other equipment with S-Video Input
4 -
Video Output 2
(BNC port)
to a TV ,monitor, AV receiver or other equipment with composite Video Input
5 -
Video Input 1
(S-Video port)
to record from a camcorder, VCR or other equipment with a S-Video output
6 -
Video Input 2/AUTO REC*
(BNC port)
to record from a camcorder, VCR or other equipment with a composite video output
7 -
Digital Out Optical
to an AV receiver, Dolby Digital/DTS decoder or other equipment with Optical Digital Input
8 -
Digital Out Coaxial
(RCA pin)
to an AV receiver, Dolby Digital/DTS decoder or other equipment with Coaxial Digital Input
9 -
Signal Gnd
recorder may fail under certain environmental conditions (excessive noise)
terminal is a ground for when multiple devices cause signal interference but is NOT a safe
grounding terminal
10 -
VHF/UHF In
(F-type)
from TV antenna
11 -
VHF/UHF Out
(F-type)
signal from the VHF/UHF In to the TV/monitor
12 -
Control In/Out
(monaural mini jacks)
to other Pioneer equipment for unified remote operation
13 -
Audio Input 1, 2/AUTO REC*
(RCA pins)
to record from a camcorder, VCR, satellite receiver or other equipment
14 -
Audio Output 1, 2
(RCA pins)
to the audio inputs of a TV, monitor, AV receiver or other equipment
Note: AUTO REC detects a signal at the Video Input 2 port but fails if a video signal is absent.
10
